ProPET Pro Direct Pressure Injection Machine

►　Clamping Unit

The linear guide rail can realize speed up to 1,000 mm/s. It can be equipped with electric opening and closing mold and direct pressure center clamping, to achieve the repeated precision of clamping force of 0.5% and low-pressure mold holding pressure dropped by 30%. Required clamping force drops by 10%, and high-pressure cylinder is used for independent support. The service life of sealing parts is prolonged by 100%. It can be equipped with mold clamping and drawing tie bar device to reduce the height requirement of factory building

►　Injection Unit

Two-stage injection molding system, with independent continuous plasticization and stable melting quality; independent plunger injection, with AA value ≤8 ppm; stable repetition precision of 0.1%; full servo electric melting adhesive, with a new energy-saving heating ring, making energy-saving rate up to 20%; screw material: H414 + hard chromium plating, with a long service life, less black spots, and easy cleaning

►　Robot Part

For the three-position/four-position out-of-mold cooling system, the production cycle is shortened. CoolPik plate three-axis is equipped with an upgraded manipulator and the preforming speed can reach 5,000 mm/s

►　Power/Operating System

High-efficiency servo hydraulic system: Its energy saving can be up to 20% and the noise is less than 83 dB. High response servo proportional valve: Fast and stable; repetitive precision of 0.2 mm. Process monitoring system SPC application: Process control and quality tracing

High integration · Energy-saving and de-noising excellence · High efficiency · Stability · Outstanding PHP300 Dimensions (L×W×H): 9000x4200x2700MM Clamping force: 350T PHP400 Dimensions (L×W×H): 9300×5500×2950MM Clamping Force: 450T